Wick Drain APE PD-100C

Prefabricated vertical soil drain

APE PD-100C vertical wick drain is one of the world's most widely used vertical drain designs. It is appropriate for most ground improvement projects requiring vertical drain.
APE PD-100C wick drain is a two-part prefabricated soil drain consisting of a formed polypropylene core covered with a spin-bonded polypropylene filter fabric. The fabric allowes water to pass into the drain core while restricting the movement of soil particles which might clog the core.

Typical propertiesSITest Method
Fabric properties
Weight125 g/m2ASTM D5261
Grab tensile strength710 NASTM D4632
Puncture strength231 NASTM D4833
Trapezoidal tear170 NASTM D4533
Mullen burst strength1255 kPaASTM D3786
Elogation at break50%ASTM D4632
Opening Size Diameter0.193 mmASTM D4751
Permittivity0.25 (s-1)ASTM D4491
Permeability0.01 cm/secASTM D4491
Flow rate1092 lpm/m2ASTM D4491
Core properties
Tensile strength825 NASTM D4632
Product properties
Discharge capacity276 LPM /meter widthASTM D4716
Hydraulic Transmissivity (m2/s)4.4E-03ASTM D4716
Thickness4.5 mm

All specifications are based on the latest product information available at this time. Constant improvement and engineering progress make it necessary that we reserve the right to make changes without notice. All physical properties are typical values.
Standard variations of 20% are normal.

We reserve the right to change technical specifications without prior notice.