Shoring

Whatever might be required to make retaining walls for any kind of open excavation e.g. for trenches, shafts, buildings, jetties, quay walls, etc.
TWF Trench Boxes Type 100
TWF Trench Boxes Type 100

The Trench Boxes Type 100 are mainly used for shallow trenches at inner city projects for laying small diameter utility lines such as water pipes, cable ducts, sewer house connections and equivalent. Four sizes of lightweight MINI spindles, which are fixed to the box plates by just two steel pins, allow a trench width from 660-3210 mm.

TWF Trench Boxes Type 300
TWF Trench Boxes Type 300

The Trench Boxes Type 300 are used for medium size projects and are a combination of light box plates of 60 mm thickness but with our Type 600, heavy duty spindle system which is also used in our Type 600 trench boxes. Consequently trenches of 980-3760 mm inner width can be supported with maximum safety and efficiency.

TWF Trench Boxes Type 600
TWF Trench Boxes Type 600

Trench Boxes are the worldwide most used mechanised shoring system for trench depths up to 4 m. No other shoring equipment is faster and easier to install. Base and top plates are available of different height, length and plate thickness to meet a wide range of site conditions and with various spindle extensions trench widths up to 4.26 m can be reached. All our trench boxes are approved by the German TBG and meet strongest safety standards.

TWF Double Slide Rails
TWF Slide Rail Shoring Systems

Our double slide rails with 'rolling strut' remain parallel during the excavating and lowering procedure and consequently the shoring plates can easily be sunken and extracted even in deep excavations. Soil movement outside the trench is minimized during the shoring process. The massive, single rolling strut offers optimum working room during all operation phases. The rolling strut can be placed at any time at the ideal position for the excavator to work in the trench without restrictions. This

Imeco Soldier Pile Shoring
Imeco Soldier Pile Shoring

The soldier pile shoring system consists of steel shoring plates which are guided in pre-installed H-piles and sunken down by the excavator to the required depth using the lower-and-cut method. Depending on the soil condition and the excavation depth, up to 3 layers of spindles are placed between the H-piles to support the earth pressure. The H-piles can be either placed by a vibrator and/or in predrilled holes to avoid any impact to nearby structures. In case of large building excavations the H-piles can also be supported by one or more layers of soil anchors.

Trench Sheets
Trench Sheets

Trench sheets are cold deformed steel profiles made by a continuous rolling process from steel coils. The sheets are overlapping (not interlocking) and mainly used to support shallow trenches in urban utility projects.

HAT-Sections
Sheet Piles Cold Rolled

Steel sheet piles are the most universal material to protect open trenches, shafts, manholes, building excavations, quay walls, jetties and much more. In combination with H-piles and pipe piles even the most demanding retaining walls can be constructed.

U-Section
Sheet Piles Hot Rolled

Steel sheet piles are the most universal material to protect open trenches, shafts, manholes, building excavations, quay walls, jetties and much more. In combination with H-piles and pipe piles even the most demanding retaining walls can be constructed.

U-Type PVC Sheet Piles
GreenWall PVC Sheet Piles

PVC Sheet piles offer many advantages such as competitive price, excellent mechanical properties, reduced weight and transportation cost, easy installation with standard vibrators, exceptional duration, less maintenance and great ecological footprint.

Sheet Pile Connection Profile LOTn
Sheet Pile Connection Profiles

Whenever you want to make special connections of retaining steel walls, we have the right connectors to hold your walls together: • Corner, T- and cross connectors for U- and Z- Larssen profiles • Connectors for cold formed for U-, Z- and HAT sheet piles • Weld-on connectors for sheet piles, pipe pile steel walls, combi steel walls, H-pile steel walls and H-pile combi walls

Trench Struts
Trench Struts

Trench strut TITAN 60 for safe working loads from 70 to 100 kN. In wide and deep trenches (large drains, sewers, etc.), generous strut spacings simplify excavation work and pipelaying. The TITAN 60 trench strut is suitable for the vertical trench sheeting often used in such situations. With angle end plates for 140 x 160 mm timber walings.

Tie Rods by Continuous Threaded Bars
Tie Rods by Continuous Threaded Bars

For marine tie application SAS thread bars are used as tie rods (horizontal tie rods between two sheet pile walls or as connection to dead man sheet piles) and as ground anchors for retaining walls (sheet piles, soldier piles and secant bore piles). Due to the continuous thread over the total length, cutting and coupling at any length of the installed tie rods is possible. Various accessories such as plates, nuts, couplers and turn buckles are available to meet different project requirements.