Downloads

Models: HD25, HD30, HD36, HD46, HD50, HD62, HD72, HD80, HD100, HD125, HD160

Because every driven pile is a tested pile. Description: Ductile iron piles are made of cast iron GJS 450-1 in sections of 5.0, 5.5 or 5.65 m net length (for container loading) and driven into the soil by an excavator with suitable hydraulic hammer. Non-grouted end bearing piles are mainly for projects with a solid stratum while grouted piles are used where skin friction can be activated. We offer the complete system including pile driving shoes for grouted and non-grouted piles as well as pile

12 attachments of our product line can unleash the full potential of your hydraulic excavators

The HPM machines are suitable for: • Bored piles with Kelly bar & CFA • Low head room & deep bored piles • Casing bored piles with oscillator • Soil mixing & vibroflotation • DTH hammer. HPM short mast foundation rigs are the ultimate solution for making large diameter piles in restricted areas underneath bridges, high- voltage overhead or telephone lines and within existing buildings. The short drilling depth can be compensated by large drilling diameters up to 4000 mm.

Models: HHP4, HHP5, HHP8, HHP10, HHP12, HHP14, HHP16, HHP18, HHP20, HHP25, HHP30, HHP35, HHP40, HHP50, HHD800, HHD1000, HHD1200, HHD1500, HHD2000, HHD2500

It is our strict company policy to provide material, equipment, machines and technical service only if we are convinced that our proposal represents technically the best and also the most economical solution for the specific project requirements. All our offers and recommendations are based on more than 40 years inter- national experience, the know-how of our business partners and actual world market prices. We meet our clients with an open heart, examine their needs carefully and aim to enter i

The ultimate solution for marine projects: Applications: • Anti-erosion protection for rivers and channels • Flood protection projects • Embarkments for irrigation channels • Retaining walls • Embankment for reinforced concrete walls • Reclamation of polluted areas • Hydraulic barriers and cut-off walls • Works against hydrogeological instability. Rechnical details • Manufactured according to DIN 164-65-01 • Monitored according to ISA 9001:2015 • Sheet pile length up to 12 m • Ultra-sealing for

The clever choice for many pile driving jobs: Description Side grip vibrators can grab the pile from the ground using the side clamp, rotate it to driving positon and drive it until a depth where the excavator can reach the pile top and use the bottom clamp to drive the pile to final depth. SGM series side grip pile drivers are modular, universal pile drivers for driving and extracting steel sheet piles, steel tubes and pipes of different dimensions as well as timber piles. With its unique

The Electrical Series From BVEM: Applications: The vibroflotation technology is especially suitable to increase the density of granular soil on large foundation treatment projects like hydropower stations, petrochemical plants, port terminals, dams and airport runways; to improve the bearing capacity of the soil, prevent uneven setilement or to treat anti- liquefaction ability of the interlayer in some section of the foundation. Vibroflots are mostly handled by crawler